The JAGUAR 970 is equipped with a new engine, which meets the requirements of the Stage V emission standard while both the 900 and 800 model series have a new control concept with CEBIS Touch and many other updates.
Maximum efficiency with up to 925 hp
The JAGUAR 990 takes the maximum engine output available in the 900 model series to 925 hp / 680 kW. The MAN V12 has a displacement of 24 litres and is also available as an 850 hp / 625 kW version in the JAGUAR 980. Also new is the MAN D4276 straight six in the JAGUAR 970. This unit develops 790 hp / 581 kW from its displacement of some 16 litres. The displacement of almost 3 litres per cylinder promises a stable power curve with sustained torque. As a result, the JAGUAR 970 has the best figures in its class with regard to fuel consumption per tonne of harvested material.
The power output of the 960 and 940 models has also increased, as has that of the JAGUAR 880 and 860 in the 800 model series. All the new engines comply with the relevant emission standards for their markets up to Stage V. The exhaust emissions of the JAGUAR 960-840 models are cleaned by selective catalytic reduction (SCR) in combination with a diesel particulate filter.
New CEBIS with touchscreen control for all JAGUAR models
The new CEBIS with a touchscreen gives the operator fast and easy access to all the machine functions. The most important adjustments can be made directly by means of switches on the armrest. Operating the JAGUAR is intuitive and possible without previous knowledge. This means that even new operators can handle the machine safely and reliably in a very short time and use its performance capacity to the full. The operator can adjust or operate the JAGUAR in four ways, as required:
- A simple tap on the touchscreen and the new CEBIS terminal reacts by providing direct access to all machine functions.
- Seven settings can be programmed as favourites and accessed by rocker switches on the CMOTION control lever.
- CEBIS rotary/push switch and pushbutton
- Direct adjustment via switches in the armrest
An optimum view under all conditions is ensured by the wide range of adjustment options provided for the CEBIS terminal. From its normal position in the operator's field of vision, the screen can be pivoted to the right, next to the armrest. This means that the operator has an optimal view of the entire front attachment when harvesting laid maize, for example.
A new steering column allows the position of the steering wheel to be optimised to meet the operator's requirements. The new dynamic steering makes steering the machine more comfortable than ever. At up to 10 km/h, the operator only needs 2/3 turns of the wheel to go from full left lock to full right. From 10 km/h, the steering wheel turns required are increased dynamically. From 20 km/h, for the sake of safe driving at higher speeds, the full number of steering wheel turns is available again. Dynamic steering is activated in CEBIS. It is possible to adjust the number of steering wheel turns required at any time.
New: CEMOS AUTO PERFORMANCE controls engine power and driving speed
With CEMOS AUTO PERFORMANCE, the JAGUAR keeps the set speed constant and regulates engine power and driving speed according to the crop mass. As the crop mass increases, the engine power is first increased and then the driving speed is reduced. If the crop mass is lower, the engine power is reduced automatically. This keeps the engine speed constant and eliminates abrupt load changes. This results in an even crop flow with high operational reliability and lower fuel consumption. The driver is relieved especially in demanding harvesting situations.